Additional information
Weight | 1 lbs |
---|---|
Dimensions | 4 × 4 × 1 in |
$59.95
This is a grade 12.9 hot forged blank that’s been heat treated and precision ground to spec, finished with an electroless nickel plating (MIL-C-26074) for the highest level of corrosion resistance. Hydrogen relieved and rated at 170,000 psi, Rockwell C38. Never worry about bent shock bolts again. Sold in pairs.
Weight | 1 lbs |
---|---|
Dimensions | 4 × 4 × 1 in |
Only logged in customers who have purchased this product may leave a review.
Mark Adams (verified owner) –
If you ride your adventure off road with luggage & you’ve bottomed that rear shock a few times you should do this.
I was skeptical since they were expensive. However I have lost 4 subframe bolts 2ea on 2 BDR rides including breaking loose the top tack welded subframe nuts so I thought it could be possible this could happen. Sure enough when I pulled the top shock bolt out I could tell from the wobble as it backed out. Mine was probably between 1-2mm out. Not to mention the bottom shock bolt was already backed out.
These are probably the best looking bolts I’ve ever seen but if they prevent a major problem down the road it is well worth the cost.